Wood Crusher Machine
DPFSJ crusher machine (driven by diesel engine)This is a combination of grinder and crusher. That is to say, small tree twigs and branches can be smashed into pieces and then ground further simulta…
Product introduction
DPFSJ crusher machine (driven by diesel engine)
This is a combination of grinder and crusher. That is to say, small tree twigs and branches can be smashed into pieces and then ground further simultaneously. With the features of less floor space occupation yet high efficiency and stable performance, the machine can be moved flexibly.
The crusher machine can be used separately or alternatively put into use as a part of briquetting process.
Wood Crusher Machine for making sawdust is a advanced machinery for sawdust which is used to produce edible fungus, or sawdust board raw material, man-made charcoal raw material, paper-making material.
Parameter Sheet:
| Model | Name | Power(hp) | Yield(kg/h) | Packaing Size(m) | GW(kg) | NW(kg) |
| DPFSJ-05 | DPFSJ Crusher600 | 15 | 400-500 | 1.7*1.02*1.66 | 420 | 370 |
| DPFSJ-06 | DPFSJ Crusher600 | 18 | 500-600 | 1.8*0.84*1.26 | 450 | 400 |
Attention:
1. Turn on the moveable biomass crusher to ensure the direction of rotation is correct.
2. The knife-edge should protrude out of the cutterhead by 2-4mm when the cutters are installed and then the bolts tightened. The outreach of all the cutters shall remain the same length.
3. Once the pressure bolts are worn-out, they shall be replaced immediately to prevent from skidding.
4. Before putting in raw material, ensure no impurities fall down inside.
DPFSJ crusher machine (driven by motor)
It is combined with functions of synchronized grinding and pulverizing. With the features of less floor space occupation, high efficiency and stable performance, the machine can be moved flexibly.
The wood raw material shall be small in diameter of less than 200mm.
And by adjusting the cutter position, powder of different size can be obtained.
The crushing machine can be used separately or alternatively put into use as a part of briquetting process.
Parameter sheet:
| Model | Name | Power(kw) | Yield(kg/h) | Packing Size(m) | GW(kg) | NW(kg) |
| DPFSJ-01 | DPFSJ Crusher400 | 11 | 200-300 | 1.23*0.6*1.14 | 275 | 240 |
| DPFSJ-02 | DPFSJ Crusher600 | 11 | 400-500 | 1.23*0.81*1.14 | 375 | 325 |
| DPFSJ-03 | DPFSJ Crusher600 | 15 | 500-600 | 1.25*0.85*1.15 | 400 | 350 |
| DPFSJ-04 | DPFSJ Crusher600(with cyclone) | 15 | 400-500 | 1.74*1.05*1.66 | 760 | 725 |
| DPFSJ-07 | DPFSJ Crusher800 | 22 | 600-800 | |||
| DPFSJ-08 | DPFSJ Crusher800 | 18.5 | 700-900 | |||
| DPFSJ-09 | DPFSJ Crusher800(with cyclone) | 18.5 | 600-800 | |||
| DPFSJ-10 | DPFSJ Crusher800(with cyclone) | 22 | 700-900 | |||
| DPFSJ-11 | DPFSJ Crusher1000 | 30 | 800-1000 | 1.8*1.05*1.4 | 1200 | 1100 |
| DPFSJ-12 | DPFSJ Crusher1000(with cyclone) | 30+5.5 | 800-1000 | 2.4*1.2*2.4 | 1550 | 1450 |
Note: moisture content of raw material should remain about 40%.
Attention:
1. Turn on the moveable biomass crusher to ensure the direction of rotation is correct.
2. The knife-edge should protrude out of the cutterhead by 2-4mm when the cutters are installed and then the bolts tightened. The outreach of all the cutters shall remain the same length.
3. Once the pressure bolts are worn-out, they shall be replaced immediately to prevent from skidding.
4. The sieve shall be altered with different mesh size in case that material is not pulverized with uniform size.
5. Before putting in raw material, ensure no impurities fall down inside.
The wood making machine can crush many kinds of wood, branches etc into sawdust directly. It also can be used to crush bamboo, straw, couch grass, sorghum straw etc. The final products can make high density board,small flakeboard,and the material edible mushrooms or charcoal making etc.
