As an important mechanical equipment, the correct installation and commissioning of biomass briquette machine is the key step to ensure the normal operation and prolong the service life of the equipment. The following are the specific methods for the installation and commissioning of the briquette machine:

First of all, the briquette machine should be installed on a horizontal concrete foundation to ensure the stability of the equipment during operation. When installing, it is necessary to use anchor bolts to firmly fix the equipment on the foundation, so as to avoid displacement or inclination of the equipment caused by vibration or other external forces.

Secondly, after completing the basic installation of the equipment, the machine body should be fully tested according to the design position of the equipment. During the test, it is necessary to check whether all parts of the equipment are firmly connected, especially the fastening of screws and other fixing devices. If there is looseness or instability, it should be adjusted and reinforced in time to ensure the safe and reliable operation of the equipment.

Then, connect the power cord and control switch correctly, and turn on the power supply. In this process, we should carefully check whether the power supply voltage is consistent with the equipment requirements, so as to avoid equipment damage caused by voltage mismatch. At the same time, ensure that all electrical wiring conforms to safety specifications to prevent potential safety hazards such as electricity leakage or short circuit.

Finally, before it is put into production, the equipment must be tested with no load. The purpose of no-load test is to check whether the equipment is running normally, including whether there is abnormal vibration and noise and whether the components are running smoothly. If problems are found, stop the machine immediately for inspection, and then put it into use after troubleshooting.

Through the above steps, the installation and commissioning of biomass briquette machine can be effectively ensured to meet the specifications, laying a solid foundation for the subsequent production operation. At the same time, in the process of use, it is necessary to maintain the equipment regularly to prolong its service life and improve work efficiency.