As an environmentally friendly mechanical equipment, biomass briquette machine has been widely used in the field of biomass energy. In order to ensure the efficient operation of equipment and prolong its service life, lubrication is an important link that can not be ignored in daily maintenance. The following are several key points of lubrication of biomass briquette machine:

1. Check the lubrication condition regularly

During the long-term operation of biomass briquette machine, friction will occur between components, which will lead to the consumption of lubricating oil and the decline of performance. Therefore, operators need to regularly check the state of lubricating oil, including whether the oil quantity is sufficient and whether the oil quality is deteriorated. If the lubricating oil is found to be discolored or thickened, it should be replaced in time to avoid affecting the operation of the equipment.

2. Choose the right lubricating oil

According to the working environment and operating conditions of biomass briquette machine, it is very important to choose suitable lubricating oil. Generally speaking, lubricating oil with high temperature resistance and good oxidation resistance should be preferred to meet the requirements of equipment under high temperature and high pressure conditions. In addition, different parts may need different types of lubricants, such as gear lubricating oil and bearing lubricating grease, which should be selected according to the manufacturer’s recommendation.

3. Key maintenance of lubrication parts

The core components of biomass briquette machine, such as press roller, die and spindle, are high friction areas in the operation of the equipment, and the lubrication of these parts is particularly important. Operators should regularly fill these parts with lubricating oil or grease according to the requirements of the equipment manual to ensure their smooth operation.

4. Avoid excessive or insufficient lubrication

Too much or too little lubrication will have a bad influence on the equipment. Excessive lubrication may lead to the overflow of lubricating oil or pollution of raw materials, while insufficient lubrication will aggravate the wear of parts. Therefore, the operator needs to strictly control the usage of lubricant according to the specific requirements of the equipment, so as to achieve an appropriate and uniform amount.

5. Pay attention to seasonal changes

In cold season, low temperature may increase the viscosity of lubricating oil, thus affecting the fluidity and lubrication effect. Therefore, lubricating oil with good low temperature performance should be selected in winter or properly preheated before starting the equipment to ensure the normal operation of the equipment.

6. Regular cleaning and replacement

After long-term use, the lubrication system may accumulate impurities or aging grease, which will reduce the lubrication effect and even damage the equipment. Therefore, the operator should clean the lubrication system regularly, and replace the lubricating oil or grease according to the suggestions in the equipment operation manual to keep the system clean.

In a word, scientific and reasonable lubrication management can not only improve the working efficiency of biomass briquette machine, but also effectively prolong the service life of equipment. In actual operation, the operator should strictly follow the maintenance manual provided by the manufacturer to ensure that the equipment is always in the best state and provide reliable guarantee for production.