The maintenance of wood briquetting machine mainly includes daily maintenance, regular maintenance and special maintenance, and the following are the specific contents:

Daily maintenance

Cleaning the machine body: After work every day, cut off the power supply, wipe the dust, sawdust and sundries on the machine surface with a clean cloth, and keep the machine body clean. In particular, pay attention to cleaning the feed inlet, briquetting die and discharge port to prevent material residue.

Inspection of parts: Check whether the connecting bolts of all parts are loose, and tighten them in time if they are loose. Check whether the tension of the conveyor belt is appropriate, and adjust it in time if there is deviation.

Lubricating key parts: Add proper amount of lubricating oil to key parts such as transmission chain, gear and bearing of briquetting machine to reduce wear and ensure the normal operation of the machine.

Regular maintenance

Weekly maintenance: In addition to daily maintenance, it is also necessary to clean the dust in the motor and electrical control box to prevent excessive dust from affecting heat dissipation and causing electrical failure. Check the oil level and quality of the hydraulic system. If the oil level is too low, add hydraulic oil, and if the oil quality is poor, replace it in time.

Monthly maintenance: Conduct a comprehensive inspection of the briquetting die to see if there is any wear, deformation or crack, and repair or replace it in time if there is any problem. At the same time, clean the filter of the hydraulic system to prevent impurities from blocking the filter element and affecting the normal work of the hydraulic system.

Annual maintenance: Change the lubricating oil in the gearbox, clean the internal parts and check the gear wear. Check the overall structure of the machine, and repair and prevent corrosion in time if it is rusted or deformed.

Special maintenance

Long-term shutdown and maintenance: If the wood briquetting machine needs to be shut down for a long time, the machine should be thoroughly cleaned and maintained first, and then the rust-prone parts should be coated with antirust oil and covered with plastic film or canvas to prevent dust and moisture from invading.

Maintenance after failure: After the machine is repaired after failure, the maintenance parts and related components should be inspected and maintained. If a component is replaced, it is necessary to check whether it is firmly installed and running normally, and at the same time, lubricate and adjust the surrounding components to ensure that the whole machine is restored to the best state.

These are the three maintenance forms of wood briquetting machine, I hope it will be useful to you!