Wood crusher is one of the commonly used equipment in wood processing. Its main function is to break large pieces of wood into small pieces for subsequent processing or transportation. However, in the process of using wood crusher, uneven discharging sometimes occurs, which not only affects the production efficiency, but also may lead to increased equipment wear. So, what are the reasons for uneven discharging of wood crusher?

First of all, the design problem of the equipment itself may lead to uneven discharge. Some crushers failed to fully consider the characteristics of materials and the processing capacity of equipment in design, which led to problems in practical use. For example, the design of the blade of the crusher is unreasonable, or the ratio of the inlet to the outlet is not harmonious, which may affect the uniformity of the discharge.

Secondly, improper operation is also one of the important reasons for uneven discharge. In the process of operation, if the feeding speed is too fast or too slow, it will affect the uniformity of discharging. Too fast feeding speed may lead to overload operation of crusher, thus affecting discharging; However, too slow feeding speed may lead to unstable operation of the crusher, which will also affect the discharging effect.

In addition, the nature of the material itself will also affect the discharge of the crusher. If the water content of the broken wood is too high or too low, it will have an impact on the crushing effect. Wood with too high water content is sticky and not easy to be broken evenly; However, the wood with low water content may be too dry and cause too much dust, which will affect the discharge.

Finally, inadequate maintenance of the equipment may also lead to uneven discharging. After long-term use, the blade of the crusher may become dull or worn, which will directly affect the crushing effect. In addition, if too much residue is accumulated inside the equipment, it will also affect the uniformity of discharging.

To sum up, the uneven discharging of wood crusher may be caused by many factors, including equipment design, operation methods, material properties and equipment maintenance. In order to solve this problem, users are advised to choose a reputable brand when purchasing equipment, and choose the appropriate model according to specific needs. At the same time, in daily use, we should operate in strict accordance with the operating procedures, and regularly check and maintain the equipment to ensure its normal operation. Through these measures, the discharging uniformity of wood crusher can be effectively improved and the production efficiency can be improved.